GLASS FENCING PRODUCT RANGE
Spigots made from 2205 stainless steel
Toughened safety glass meets NZ safety standards
12 year warranty
Square Spigot
Product code: GH-SF-RSF-B
-
Diameter: 50x50mm; H: 150mm; Flange: 100mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Corner Joiner
Product code: GH-GC90CRNR-B
-
Diameter: 75mm; Width: 22mm; Height: 25mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Square End Cap Polished
Product code: GHB-25ENDCP-B
-
Length: 23mm; Width: 26mm; Height: 21mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Square Inline Joiner
Product code: GHB-25SJNR-B
-
Length: 163.6mm
-
Width: 21mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Face Fixed Stand Off Pin
Product code: GHB-FACEFIXB
-
Diameter: 50mm;
-
Length: 30mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
End Bracket
Product code: GH-GC-ENDBRCK-B
-
Diameter: 60mm; Width: 27mm; Height: 60mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Square Wall Tie
Product code: GHB-25SWALL-B
-
Length: 23mm; Width: 31mm; Height: 53mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Self Closing Hinges
Product code: GH-HINGE-G2G-B
-
Hole Centres: 47mm
-
Shaft Diameter: 22mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Inline Joiner
Product code: GH-GC-INLINE-B
-
Diameter: 75mm; Width: 22mm; Height: 25mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Top Mount Square Handrail
Product code: GHB-RIL-SQ2.9-B
-
Length: 2.9m; Width: 25mm; Height: 25mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Square 90° Joiner
Product code: GHB-25S90C-P
-
Length: 110mm
-
Width: 110mm
-
Materials: Electrostatic powder coated 316 Stainless Steel
Gate Latch
Product code: GH- LATCH180-B
-
Gate Plates: 64 x 75mm
-
Latch Plates: 40 x 75mm
-
Materials: Electrostatic powder coated 316 Stainless Steel + Polymer Plastic
Please check with your local council before installing your pool fencing and gate. PS1 document available on request. Customers should consult a Licensed Building Practitioner if they have any concerns as to the stability of the surface to which the fencing is being installed.
Please be aware that the installation needs to comply with NZ Building code even where a building consent is not required.
Guardian Glass Pool fencing panels are not suitable for balustrade.
Guardian Glass Balustrade systems must be installed with a handrail (AS/NZS 1170).
Measuring you fence correctly is the most vital step to ensure you order the correct materials for the job. To help you get started with transforming your outdoor living space, view our Glass Fencing Installation Guide.
Disclaimer: Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colours of products may also appear different to those shown on the site.